- หน้าแรก
- ระบบสินค้า
Teach Line Extruder
COLLIN
E 12, E 16, E 20, E 20 H
The single-screw extruder is the standard machine for the continuous plasticising of polymers. The table-top units combine high process variability with accurate control and regulation of all parameters.
Extruders E
COLLIN
E 12 E, E 16 E, E 20 E, E 25 E, E 30 E, E 45 E
The Type E series extruder is the entrance version of the Collin ext ruders. Designed for laboratory operations and test runs in R&D, the compact systems are a cost-effective alternative to the Type P Professional series extruder.
The extruder is assembled on a moveable electric cabinet which inc...
P Professional Extruder for production, R&D
COLLIN
The P Professional Extruders are real allrounders, since they can be used for different requirements. Thanks to an innovative concept, these lines are versatile: for R&D or the production with flexible throughput range.
Modularity – one of the advantages of COLLIN products – is shown by the P series Extruders. Different downstream...
Teach Line Twinscrew Extruder
COLLIN
ZK 12, ZK 16, ZK 25
The Collin compounders are suitable for the continuous melting, mixing, homogenising, alloying and extruding of plastic materials.
All Collin compounders are available for co-rotating and counter-rotating operation. The table-top compounder consists of a process part with a drive, set up on the electrical switch cabinet.
Compounders E
COLLIN
ZK 16 E, ZK 25 E
The Collin Compounder Type E Entrance is perfectly suitable for easy compounding tasks. The free-standing machine can connect different polymers in various ways and is very flexible when it comes to dosing – side feeders, volumetric or gravimetric dosing units. The compounder also shows flexibility with the downstream equipm...
P Professional Compounder – for pilot series & production Flexible, modular high-performance design.
COLLIN
The P for Professional, P series Compounders are the high-performance version of COLLIN compounders. Therefore, they are also available as high-temperature version for a process temperature of up to 450°C.
Advantages
Quick retrofitting between co and counter-rotating
Modular design and application possibilities
Easy handling
Different ap...
Entrance presses E, E air and E+
COLLIN
The Type E series platen presses is the entrance version among COLLIN presses.
As a 4-column design with a fixed, upper counter-plate and moveable, lower platen, Collin presses cover an enormous range of pressure. The big distance between the columns creates ideal opportunities to act within the interior of the press.
Advantages
Eonomically de...
High Performance Presses S, SV
COLLIN
The S and SV platen presses are the high-performance models of the Collin presses.
The Collin presses series S convince by ergonomic, space-saving and modern design -– the new high-capacity servohydraulics by its quiet operation, high-precision pressure control and low energy consumption. Moreover, due to this servohydraulics concept, coolin...
Presses for medical & pharma
COLLIN
They are manufactured according to the guidelines of the FDA 21 CFR, ISPE, ISO 13485, DIN EN 10204/3.1B, cGMP/GMP.
Advantages
Highest precision
Tight tolerances
Cleanness
Process accuracy
Good cleaning handling
Clean room conformity
Quick and excellent service
Custom-designed
Customer training programs
Exemplary applications
Clean...
Teach Line Blown Film
COLLIN
BL 200
The BL 200, clearly arranged and easy to operate, is intended for the production of blown films made from standard polymers.
A blown film die optimised for melt flow and with gap adjustable cooling ring guarantees extremely thin and even blown films. 3, 5 and 7-layer dies allow for producing more complex packaging film compounds or t...
Blown film lines E (air-cooled)
COLLIN
BL 400 E
The version Blown Film Line E is the entrance version and is particularly used for quality control. This line has got a central column with a fixed overall height and a simple mono cooling ring.
P Professional Blown Film Lines – for multi-layer films or film hoses Lines up to 13 layers.
COLLIN
The modular system of the P Professional Blown Film Lines allows the configuration of lines with 13 layers and the suitable screw diameters. These lines always have a working platform. The machines can be equipped with melt pumps or gravimetric dosing in order to guarantee that the necessary wall thickness proportions are met.
COLLIN blown film to...
Blown film lines P (water-cooled)
COLLIN
WBL 600 P, WBL 800 P, WBL 1000 P
These lines are designed for the production of films. The radial spiral mandrel distributor provides an accurate thickness distribution, the vertical extrusion in a water cooling ring guarantees optimal transparency of films.
Teach Line Cast Film
COLLIN
CR 72/72/72-200
This machine combines the known features of a cast film line withthose of a small calender in a compact arrangement.
Different processes are possible due to the flexible rolls:
Smoothing of films
Laminating of films
Pulling of flat films at horizontal arrangement of dies
Casting of low viscosity melts with vertical die
Cast Film Lines with Two Rolls
COLLIN
CR 144/144-200 XS, CR 144/144-200,CR 144/144-400, CR 250/250-400,CR 250/250-600
The base unit consists of two horizontally arranged chill rolls, suitable for cast films within a thickness range from 20 to 300 μm. Collin ad apts the speed and roll-diameter of the chill rolls according to the customer‘s needs.Downstream equipment can also b...
Cast Film Lines with Three Rolls
COLLIN
CR 72/144/72-200, CR 72/144/72-200 Air, CR 72/144/72-400,CR 72/144/72-400 Air, CR 72/144/144-200,CR 72/144/144-400
These versions combine finishing calender and the chill roll and are used for the production of thin-walled or double-wall films. The 3-roll unit can be used for vertical or horizontal operation. The forces in the polishing gap can be...
Flat film lines CR
COLLIN
CR 400/168/168-600 P, CR 400/168/168-800 P,CR 400/168/168-1000 P, CR 800/300/300-600 P,CR 800/300/300-800 P, CR 800/300/300-1000 P,CR 250/250-600 P, CR 250/250-800 P,CR 250/250-1000 P
Flat film lines are particularly used for the production of films or sheets with a variety of options for smoothing, embossing and laminating.
Flat film lines in th...
Multifunctional coating lines
COLLIN
MF 400/144/126-400, MF 400/144/126-600
Multifunctional coating lines are used in the packaging sector, helping to produce polymer composites with carrier materials such as paper, textile, fleece or aluminium. The system allows for integrating different additional devices, e.g. corona pretreatment, application of glue, IR-oven or further unwinders....
Module lines
COLLIN
MF 800 P, MF 1000 P
Module lines are used in the packaging sector for the production of multi-polymer compounds, e. g. with carrier materials. The system allows the integration of different modules such as flat film, blown film and calendering unit as well as miscellaneous additional equipment, e. g. Corona pre-treatment or additional unwinders....
Teach Line Roll Mill
COLLIN
W 100
The roll mill is used for mixing, plasticising, kneading and laminating of plastics and elastomers. The Collin machine is ideal for examining small quantities and for trainings.
Roll mills E and ER - for laboratory & pilot tests Economically reasonable, compact, flexible.
COLLIN
Collin customers use the laboratory roll mills of the cost-effective E series as training instruments, for testing small batches, for routine work or for testing thermoplastics and elastomers (design ER Entrance Rubber). With ER rolling mills, elastomers can be processed due to the more powerful drives.
The COLLIN roll mills are used for mixing, p...
Roll mills P and PR Professional - the perfect testing roll mill High reproduction accuracy, laboratory tests.
COLLIN
The P series Collin Roll Mills are characterized by a very high repro-ducibility and are designed for more challenging laboratory tests.
Used for mixing, plasticizing, kneading or pulling of plastics, the Collin testing roll mills are equipped with a motor-driven gap adjustment.
Advantages
Perfect for more challenging laboratory tests.
Very g...
Roll mills M Measuring - Production control, R&D Exact, comprehensive & high reproducibility.
COLLIN
M measuring roll mills are indispensable as the measuring rolling mills for all processes in development and production control.
The accuracy of the setting parameters and the large number of integrated measuring devices allow a reproducible determination of characteristic material data, which supports the creation of optimal setting parameters fo...
K3 SERIES (mV/V output)
GEFRAN
K3 SERIES 3.33mV/V output
NaK FILLED MELT PRESSURE TRANDUCERS
The K3 Series are for use in high temperature applications where the process temperatures may reach 538°C (1000°F) such as high temperature engineered polymers. The K Series utilizes standard melt pressure principles and construc...
KE SERIES (4...20mA output)
GEFRAN
KE SERIES 4...20mA output
NaK FILLED MELT PRESSURE TRANSMITTERS
The KE Series are for use in high temperature applications where the process temperatures may reach 538°C (1000°F) such as high temperature engineered polymers. The K Series utilizes standard melt pressure principles and construction,...
KN SERIES (Voltage output)
GEFRAN
KN SERIES Voltage output
NaK FILLED MELT PRESSURE TRANSMITTERS
The KN Series are for use in high temperature applications where the process temperatures may reach 538°C (1000°F) such as high temperature engineered polymers. The K Series utilizes standard melt pressure principles and construction, but uses a ne...
M3 SERIES (mV/V output)
GEFRAN
M3 SERIES mV / V output
MELT PRESSURE TRANSDUCERS
The M3 series of Gefran, are pressure transducers for using in High temperature environment. The main characteristic of this series is the capability to read temperature of the media up to 400°C. The constructive principle is based on the hydraulic trasmission of...
ME SERIES (Output 4...20mA)
GEFRAN
ME SERIES Output 4...20mA
MELT PRESSURE TRANSMITTERS
The ME series of Gefran, are pressure transmitters for using in High temperature environment. The main characteristic of this series is the capability to read temperature of the media up to 400°C. The constructive principle is based on the hydraulic tras...
MN SERIES (Voltage output)
GEFRAN
MN SERIES Voltage output
MELT PRESSURE TRANSMITTERS
The MN series of Gefran, are pressure transmitters for using in High temperature environment. The main characteristic of this series is the capability to read temperature of the media up to 400°C. The constructive principle is based on the hydraulic trasmission of the pressure. The...
IE SERIES (4-20mA Output)
GEFRAN
IE SERIES AND PLc VERSION 4-20mA Output
IMPACT MELT PRESSURE TRANSMITTERS
The “IMPACT” series of Gefran, are pressure transmitters, without transmission fluid, for using in High temperature environment (350°C). Medium pressure is transferred directly to the sensitive silicon element via a thick diaphragm. Strain is transduced by...
Teach Line Extruder
COLLIN
E 12, E 16, E 20, E 20 H
The single-screw extruder is the standard machine for the continuous plasticising of polymers. The table-top units combine high process variability with accurate control and regulation of all parameters.
Extruders E
COLLIN
E 12 E, E 16 E, E 20 E, E 25 E, E 30 E, E 45 E
The Type E series extruder is the entrance version of the Collin ext ruders. Designed for laboratory operations and test runs in R&D, the compact systems are a cost-effective alternative to the Type P Professional series extruder.
The extruder is assembled on a moveable electric cabinet which inc...
P Professional Extruder for production, R&D
COLLIN
The P Professional Extruders are real allrounders, since they can be used for different requirements. Thanks to an innovative concept, these lines are versatile: for R&D or the production with flexible throughput range.
Modularity – one of the advantages of COLLIN products – is shown by the P series Extruders. Different downstream...
Teach Line Twinscrew Extruder
COLLIN
ZK 12, ZK 16, ZK 25
The Collin compounders are suitable for the continuous melting, mixing, homogenising, alloying and extruding of plastic materials.
All Collin compounders are available for co-rotating and counter-rotating operation. The table-top compounder consists of a process part with a drive, set up on the electrical switch cabinet.
Compounders E
COLLIN
ZK 16 E, ZK 25 E
The Collin Compounder Type E Entrance is perfectly suitable for easy compounding tasks. The free-standing machine can connect different polymers in various ways and is very flexible when it comes to dosing – side feeders, volumetric or gravimetric dosing units. The compounder also shows flexibility with the downstream equipm...
P Professional Compounder – for pilot series & production Flexible, modular high-performance design.
COLLIN
The P for Professional, P series Compounders are the high-performance version of COLLIN compounders. Therefore, they are also available as high-temperature version for a process temperature of up to 450°C.
Advantages
Quick retrofitting between co and counter-rotating
Modular design and application possibilities
Easy handling
Different ap...
Entrance presses E, E air and E+
COLLIN
The Type E series platen presses is the entrance version among COLLIN presses.
As a 4-column design with a fixed, upper counter-plate and moveable, lower platen, Collin presses cover an enormous range of pressure. The big distance between the columns creates ideal opportunities to act within the interior of the press.
Advantages
Eonomically de...
High Performance Presses S, SV
COLLIN
The S and SV platen presses are the high-performance models of the Collin presses.
The Collin presses series S convince by ergonomic, space-saving and modern design -– the new high-capacity servohydraulics by its quiet operation, high-precision pressure control and low energy consumption. Moreover, due to this servohydraulics concept, coolin...
Presses for medical & pharma
COLLIN
They are manufactured according to the guidelines of the FDA 21 CFR, ISPE, ISO 13485, DIN EN 10204/3.1B, cGMP/GMP.
Advantages
Highest precision
Tight tolerances
Cleanness
Process accuracy
Good cleaning handling
Clean room conformity
Quick and excellent service
Custom-designed
Customer training programs
Exemplary applications
Clean...
Teach Line Blown Film
COLLIN
BL 200
The BL 200, clearly arranged and easy to operate, is intended for the production of blown films made from standard polymers.
A blown film die optimised for melt flow and with gap adjustable cooling ring guarantees extremely thin and even blown films. 3, 5 and 7-layer dies allow for producing more complex packaging film compounds or t...
Blown film lines E (air-cooled)
COLLIN
BL 400 E
The version Blown Film Line E is the entrance version and is particularly used for quality control. This line has got a central column with a fixed overall height and a simple mono cooling ring.
P Professional Blown Film Lines – for multi-layer films or film hoses Lines up to 13 layers.
COLLIN
The modular system of the P Professional Blown Film Lines allows the configuration of lines with 13 layers and the suitable screw diameters. These lines always have a working platform. The machines can be equipped with melt pumps or gravimetric dosing in order to guarantee that the necessary wall thickness proportions are met.
COLLIN blown film to...
Blown film lines P (water-cooled)
COLLIN
WBL 600 P, WBL 800 P, WBL 1000 P
These lines are designed for the production of films. The radial spiral mandrel distributor provides an accurate thickness distribution, the vertical extrusion in a water cooling ring guarantees optimal transparency of films.
Teach Line Cast Film
COLLIN
CR 72/72/72-200
This machine combines the known features of a cast film line withthose of a small calender in a compact arrangement.
Different processes are possible due to the flexible rolls:
Smoothing of films
Laminating of films
Pulling of flat films at horizontal arrangement of dies
Casting of low viscosity melts with vertical die
Cast Film Lines with Two Rolls
COLLIN
CR 144/144-200 XS, CR 144/144-200,CR 144/144-400, CR 250/250-400,CR 250/250-600
The base unit consists of two horizontally arranged chill rolls, suitable for cast films within a thickness range from 20 to 300 μm. Collin ad apts the speed and roll-diameter of the chill rolls according to the customer‘s needs.Downstream equipment can also b...
Cast Film Lines with Three Rolls
COLLIN
CR 72/144/72-200, CR 72/144/72-200 Air, CR 72/144/72-400,CR 72/144/72-400 Air, CR 72/144/144-200,CR 72/144/144-400
These versions combine finishing calender and the chill roll and are used for the production of thin-walled or double-wall films. The 3-roll unit can be used for vertical or horizontal operation. The forces in the polishing gap can be...
Flat film lines CR
COLLIN
CR 400/168/168-600 P, CR 400/168/168-800 P,CR 400/168/168-1000 P, CR 800/300/300-600 P,CR 800/300/300-800 P, CR 800/300/300-1000 P,CR 250/250-600 P, CR 250/250-800 P,CR 250/250-1000 P
Flat film lines are particularly used for the production of films or sheets with a variety of options for smoothing, embossing and laminating.
Flat film lines in th...
Multifunctional coating lines
COLLIN
MF 400/144/126-400, MF 400/144/126-600
Multifunctional coating lines are used in the packaging sector, helping to produce polymer composites with carrier materials such as paper, textile, fleece or aluminium. The system allows for integrating different additional devices, e.g. corona pretreatment, application of glue, IR-oven or further unwinders....
Module lines
COLLIN
MF 800 P, MF 1000 P
Module lines are used in the packaging sector for the production of multi-polymer compounds, e. g. with carrier materials. The system allows the integration of different modules such as flat film, blown film and calendering unit as well as miscellaneous additional equipment, e. g. Corona pre-treatment or additional unwinders....
Teach Line Roll Mill
COLLIN
W 100
The roll mill is used for mixing, plasticising, kneading and laminating of plastics and elastomers. The Collin machine is ideal for examining small quantities and for trainings.
Roll mills E and ER - for laboratory & pilot tests Economically reasonable, compact, flexible.
COLLIN
Collin customers use the laboratory roll mills of the cost-effective E series as training instruments, for testing small batches, for routine work or for testing thermoplastics and elastomers (design ER Entrance Rubber). With ER rolling mills, elastomers can be processed due to the more powerful drives.
The COLLIN roll mills are used for mixing, p...
Roll mills P and PR Professional - the perfect testing roll mill High reproduction accuracy, laboratory tests.
COLLIN
The P series Collin Roll Mills are characterized by a very high repro-ducibility and are designed for more challenging laboratory tests.
Used for mixing, plasticizing, kneading or pulling of plastics, the Collin testing roll mills are equipped with a motor-driven gap adjustment.
Advantages
Perfect for more challenging laboratory tests.
Very g...
Roll mills M Measuring - Production control, R&D Exact, comprehensive & high reproducibility.
COLLIN
M measuring roll mills are indispensable as the measuring rolling mills for all processes in development and production control.
The accuracy of the setting parameters and the large number of integrated measuring devices allow a reproducible determination of characteristic material data, which supports the creation of optimal setting parameters fo...
K3 SERIES (mV/V output)
GEFRAN
K3 SERIES 3.33mV/V output
NaK FILLED MELT PRESSURE TRANDUCERS
The K3 Series are for use in high temperature applications where the process temperatures may reach 538°C (1000°F) such as high temperature engineered polymers. The K Series utilizes standard melt pressure principles and construc...
KE SERIES (4...20mA output)
GEFRAN
KE SERIES 4...20mA output
NaK FILLED MELT PRESSURE TRANSMITTERS
The KE Series are for use in high temperature applications where the process temperatures may reach 538°C (1000°F) such as high temperature engineered polymers. The K Series utilizes standard melt pressure principles and construction,...
KN SERIES (Voltage output)
GEFRAN
KN SERIES Voltage output
NaK FILLED MELT PRESSURE TRANSMITTERS
The KN Series are for use in high temperature applications where the process temperatures may reach 538°C (1000°F) such as high temperature engineered polymers. The K Series utilizes standard melt pressure principles and construction, but uses a ne...
M3 SERIES (mV/V output)
GEFRAN
M3 SERIES mV / V output
MELT PRESSURE TRANSDUCERS
The M3 series of Gefran, are pressure transducers for using in High temperature environment. The main characteristic of this series is the capability to read temperature of the media up to 400°C. The constructive principle is based on the hydraulic trasmission of...
ME SERIES (Output 4...20mA)
GEFRAN
ME SERIES Output 4...20mA
MELT PRESSURE TRANSMITTERS
The ME series of Gefran, are pressure transmitters for using in High temperature environment. The main characteristic of this series is the capability to read temperature of the media up to 400°C. The constructive principle is based on the hydraulic tras...
MN SERIES (Voltage output)
GEFRAN
MN SERIES Voltage output
MELT PRESSURE TRANSMITTERS
The MN series of Gefran, are pressure transmitters for using in High temperature environment. The main characteristic of this series is the capability to read temperature of the media up to 400°C. The constructive principle is based on the hydraulic trasmission of the pressure. The...
IE SERIES (4-20mA Output)
GEFRAN
IE SERIES AND PLc VERSION 4-20mA Output
IMPACT MELT PRESSURE TRANSMITTERS
The “IMPACT” series of Gefran, are pressure transmitters, without transmission fluid, for using in High temperature environment (350°C). Medium pressure is transferred directly to the sensitive silicon element via a thick diaphragm. Strain is transduced by...
- arrow_back
- 1
- 2
- arrow_forward
